i-Cooking cooking appliances

Gashobs en Inductionhobs by ABK InnoVent

Free space below the cooker

The way an integrated i-Cooking cooktop is mounted is different than with a normal cooker. In case off a service-call an i-Cooking integrated cooker must be removed via the underside off the worktop. Conventional cooktops like our KOONAKA can always be removed from the top, but since the i-Cooking hobs are integrated solid in the worktop this is no longer possible. There should be enough space below the hob (> 150mm) to lower the bottom tray of the cooktop. Then he can be moved forward, backward or sideways. Fixed front panels and cabinets under the cooktops are potential obstacles. Front panels should be disassembled and in cupboard sidepanels there should be an appropriate recess. All of course before the assembly of the i-Cooking arrangement.

Extra recesses for a 24-40mm thick worktop

The i-Cooking gashob (type ICGX) is designed to be fitted in a massive worktop with a maximum thickness of 40mm. The standard ICGX hob is suitable for a top layer thickness of 9-24mm. For a top layer with a thickness between 24-40mm a special lower rim must be fitted. This generally occurs with concrete worktops. Worktops thicker than 40mm are not technically possible. For worktops with a solid top layer thicker than 24mm you must create an extra recess at the bottom side as an additional clearance for the WOK gas pipe. For worktops with a top layer of 24mm or less this does not apply.

Recess drawing 24-40mm worktop

Gas and electic connection

On the back of the appliance there is a 1/2" gas supply and a 230V power cord. Mount the supply’s in such a way that it is always possible to disconnect them without removing the cooktop. The exact position of the gas connection is on the productdrawing.

i-Cooking demounting instruction - worktop thickness more than 99mm

i-Cooking demounting instruction - worktop thickness less than 99mm

i-Cooking demounting instruction - worktop thickness more than 99mm

i-Cooking demounting instruction - worktop thickness less than 99mm